Indoor System

We offer an indoor system that allows you to keep your pet contained completely indoors. Or, if you have an indoor/outdoor pet and would like for your pet to be able to acces the front or back yards while restricting acces to certain rooms or areas of the home, the RT-2 Transmitter is the answer you're looking for.

RT-2 Transmitter

The RT-2 room transmitter is a small versatile device that is designed for containing or restraining pets in or from designated areas inside of the home. It can be used in the home, garage or basement. The RT-2 room transmitter is portable and can travel with you and your pet

The AC Adapter has a 10-foot long cord, so it should accommodate most outlet configurations in the home.
The RT-2 room transmitter radiates a 360ª signal up to 8 feet.
The RT-2 room transmitter is available in two frequencies.
It has non-encoded or encoded mode settings.
When the RT-2 room transmitter is set in the encoded mode, an ID code makes the system immune to all interference from stray signals and provides “DUAL ZONES”, in the signal field. The dual zone establishes two signal fields. In the first signal field, the pet receives a warning level stimulus that has been preset on the front of the RT-2 room transmitter. Its purpose is to warn the pet to turn back. Should the pet enter the second signal field, the receiver will automatically increase to a stronger stimulus.
The RT-2 room transmitter is a great way to keep pets off countertops, furniture, out of special rooms or out of the garbage!
RT-2 room transmitter has a LIFE TIME warranty.

The GREEN POWER LIGHT serves as a power light, wire break and surge indicator. If there is a wire break, it will flash with an audible alarm. The same holds true in the event of a surge The CORRECTION LEVEL ADJUSTMENT works only in the encoded mode. There are 32 LEVELS OF STIMULATION TO CHOOSE FROM. This will set the amount of stimulation the pet will receive in the first signal field. The RANGE CONTROL adjuster is recessed to prevent unwanted tampering. The field range can be easily adjusted by using a small screwdriver